How to add the line works on terrain data

Introduction

This article explains how to add line works data to the terrain on a project.
You can view the longitudinal profile and cross-section in the view from the added line works data.

The alignment created from road/floor excavation will be an IP straight line. The extraction method for clothoid curve is currently under preparation.

Procedures and Explanation

Add line works

1) Click “Add line works” and select the type to create
There are three creation methods
・Create from a SIMA file (.sim)
・Create from any line works
・Create from roads or excavations

Created from SIMA file (.sim)

1) Click [Select Files] and upload the .sim file

2) Set the Layer name and Data capture date (Registration Date), then click Upload.

Create from an arbitrary line

1) Left-click where you want to draw, then right-click and select “Finish Drawing”

2) Name the created line and click Add.

Creating Road and Floor digging

For road and floor digging, we recommend outputting from the object data of the created data.

1) Display the data (A) to which you wish to add a Lineworks data.

2) Click the menu button and select “Linework creation”

3) Added linear data is stored within the Line works data layer and will be displayed as a line when the target data is shown.